23 of 39
SW-41Plus 4x1 HDMI Switch User Manual
UM-002-0001-000-00 |
July 22, 2020
© 2020 Zigen Corporation
www.zigencorp.com
S
W
-4
1P
lu
s
U
se
r
M
a
n
ua
l
Audio Selection
The Audio Selection menu selects the audio source to be heard on the TOSLINK Output and the RCA
Analog Output. Click on the Audio Selection pulldown to pick either the selected local HDMI input or
Audio Return Channel (ARC) from the sink device. The local HDMI input is the default selection.
Refer to section
4 ARC Support
for more information on enabling system ARC functionality.
Master Volume
Use slider and Mute button to control the volume of the Analog Audio output. TOSLINK and Embedded
audio of the HDMI output will not change.
Equalizer
The Equalizer only controls the frequency response of the Analog Audio output. TOSLINK and Embedded
audio of the HDMI output will not change.
1.)
Presets: Select a preset to configure the parametric equalizer
2.)
Graphical EQ: Use the sliders to configure dB levels for each frequency band.
3.)
Tone Control: Use the sliders to set bass and treble.
4.)
Disable: By-pass digital tuning.
Surround Sound Effect
The Surround Sound Effect only controls the spatial response of the Analog Audio output. TOSLINK and
Embedded audio of the HDMI output will not change.
Use the toggle and slider to configure the surround sound effect.
Bass Enhancement
The Bass Enhancement only controls the bass response of the Analog Audio output. TOSLINK and
Embedded audio of the HDMI output will not change.
Use the drop-down menus to configure the cut-off frequency and high-pass filter cut-off frequency. The
high-pass filter can also be bypassed. Use the Bass Boost slider to set the bass levels.
Audio
