ZIEHL-ABEGG ZAtop SM180.24/B, Оригинальная инструкция по эксплуатации

Страница: 8 / 76

no.
Designation
no.
Designation
1 CE mark 13 T
r
- Rated torque [Nm]
2 S/N - Motor number 14 I
max
- Acceleration current [A]
3 Type - Motor type and size 15 I
r
- Rated current [A]
4 Network form / Connection type /
Rated voltage
[V] 16 n - Rated speed [rpm]
5 cos ϕ - Power factor 17 P
r
- Rated power [kW]
6 J
M
- Moment of inertia [kg m
2
] 18 Speci fi cation of relevant standard
7 Mode 19 Protection rating
8 Duty - On time [%] 20 Insulation class
9 Mass - Weight [kg] 21 U
G
- Generator voltage
10 R
U20
- Winding resistance [ Ω ] 22 Rated frequency [Hz]
11 Trips per hour [st/h] 23 Series
12 T
max
- Acceleration torque [Nm] 24 QR code
Table 3-2
Values for maximum load for operation of elevator (trip with full cabin down and with full cabin
up):
295 Nm; 20 % on time; 5 kW; 14 A
Values for average load for operation of elevator:
210 Nm; 40 % on time; 3.6 kW; 10 A
Note:
The fi rst rated currrent is the decisive factor in the selection of both the frequency inverter and the line
cross section of the motor cable.
3.3 Transport
•
ZIEHL-ABEGG SE elevator machine are packed by the manufacturer for the types of transport and
storage agreed upon.
" Check packing and elevator machine for possible damage and report the forwarding agency about
any damages caused by transport. Shipping damages are not covered by our guarantee!
" Avoid excessive vibration and shockloads!
" Extreme heat or cold (transport temperature -20 ° C to +60 ° C) must be avoided!
3.3.1 Transport
" O Transport the elevator machine in the original packing.
3.3.2 Lifting
Figure 3-3-2-01 - Position of attachment points Figure 3-3-2-02 - Diagonal pull lifting gear
Original operating instructions
ZAtop – model series SM180 Product overview
A-TBA17_05-GB 2008 Index 003Part.-No. 01015765-GB (EU-BD 845/1 + 845/2)
8/76