Operation
Step
Action
Result
Illustration
1
Press red button on
the motor
Until motor beeps x 6
Check the
motor
direction
Check the direction of
the motor by pressing
UP
or
DOWN
on the
switch
If correct go to set up lower
stop steps 2-4, if incorrect go
to change motor direction
step 14
2 Press
DOWN
button
Motor rolls down
3
When motor gets close
to the required lower
limit, press
STOP
button
Motor stops
4
Press
DOWN
button
AGAIN
Motor runs step by step to
adjust lower limit accurately
5
Press
CONFIRM
button
The motor beeps x 1, and the
lower limit has been set.
6
Press
UP
button
Motor rolls up
7
When motor gets close
to the required upper
limit, press
STOP
button.
Motor stops
8
Press
UP
button
AGAIN
Motor runs step by step to set
upper limit accurately
9
Press
CONFIRM
button
The motor beeps x 1 and the
upper limit has been set.
Issue: 10/14
R1705-RH, R1706-LH Battery Motor Instruction
Motor Torque/speed: 0.7Nm/34rpm
●
Motor is combined with a wired switch and powered by a battery wand
●
The side of motor mount with SETTING button should face to you
●
Please replace batteries when the motor alarm sounds
Set-up
upper stop
Set-up
lower Stop
1a)
1b)
2)
3)
4)
5)
6)
7)
8)
Up Button
Down Button
Confirm Button
9)
