11. Release assembly shaft (11) loosen with an allen wrench SW 17 and take it o
ff
the motor shaft.
12. Provide threadlocker Loctite 243 or a similar product to the thread of the adapter shaft (9).
13. Screw the adapter shaft (9) onto the motor shaft with wrench (9) and screw wrench SW 32
Tightening torque: 60 Nm
14.
Check air gap "A" between the coil carrier and armature disk when de-energised:
Air gap: 0.4 mm
≤
"A"
≤
0.65 mm
This air gap must be present in the area of the vertical central axis of both armature
disks (19).
See the brake operating instructions in the appendix.
15.
Check the air gap "B" > 0.25 mm between the brake rotor and armature disk when
energised.
The test air gap must be present.
See brake operating instructions in the appendix.
✓
If the air gaps are outside the tolerance, please contact our customer service.
Translation of the original operating instructions
ZAtop
–
model series SM210.60B/SM210.70B
Service and maintenance
A-TBA17_01-GB 2023/46 Index 008Part.-No. 01013389-GB (EU-BD 1014/1)
36/96
