ZIEHL-ABEGG ZA top SM210.60, Оригинальная инструкция по эксплуатации

Страница: 13 / 96

4.5.1 Rope guard fastening in the case of a traction sheave diameter of 240 mm
For wrap angle 180 ° .
Figure 4-5-1-01 - Rope guard for traction sheave diameter 240 mm
" " The rope guard (1) is fastened to the bearing bracket with two hexagon head screws M8 x 16 -
8.8 (3) and washers (4) in each case.
" " The slotted hole in the rope guard (1) enables the required distance to the ropes to be set at the
hexagon head screws M8 x 16 - 8.8 (3).
Tightening torque M8 - 8.8: 23 Nm
" " The third rope retainer (2) is attached to both threaded bolts of the bracket (5) and fastened with
two hexagon nuts M8 (6) and washers (7).
" " The elongated hole in the rope retainer (2) enables the required distance to the ropes to be set at
the hexagon nuts M8 (6).
Tightening torque M6 - 8.8: 23 Nm
4.5.2 Rope guard fastening in the case of a traction sheave diameter of 320 mm
For wrap angle 180 ° .
Figure 4-5-2-01 - Rope guard for traction sheave diameter
320 mm
Figure 4-5-2-02 - 3rd rope retainer (optional) with traction
sheave diameter 320 mm
" " The rope guard (1) is fastened to the bearing bracket with two hexagon head screws M8 x 16 -
8.8 (3) and washers (4) in each case.
" " The slotted hole in the rope guard (1) enables the required distance to the ropes to be set at the
hexagon head screws M8 x 16 - 8.8 (3).
Tightening torque M8 - 8.8: 23 Nm
" " The third rope retainer (2) is inserted into the bracket (5) with both threaded bolts and fastened with
two hexagon nuts M8 (6) and washers (7).
" " The elongated hole in the bracket (5) enables the required distance to the ropes to be set at the
hexagon nuts M8 (6) .
Tightening torque M8 - 8.8: 23 Nm
Translation of the original operating instructions
ZAtop – model series SM210.60B/SM210.70B Mechanical installation
A-TBA17_01-GB 2023/46 Index 008Part.-No. 01013389-GB (EU-BD 1014/1)
13/96