Ziegler & Brown ZTGK, Руководство по эксплуатации

Страница: 9 / 32

•
Double check that the gas cylinder valve is securely in the OFF position before
attempting to connect the regulator to the gas cylinder.
•
If using without a cart, attach the chain to the gas cylinder handle and to the
cross brace on the right of the barbeque. This is to prevent the hose from being
able to be over stretched.
•
For cart models hook the LPG cylinder onto the right side of the cart, so that it
hangs vertically.
•
Take the hose that came with the barbeque, check that it has a rubber seal on the
regulator end of it, and connect this end of the hose to the gas cylinder. You won’t
need a spanner here. Just turn the fitting in an
anticlockwise
direction and hand
tighten as much as you can. This should seal it sufficiently.
•
The regulator as supplied should be firmly tightened but care must be taken not
to over-tighten the connections. The regulator as supplied is the correct regulator
for this item.
•
Ensure the gas cylinder remains upright at all times.
•
Should there be any concern in making the correct regulator connection please
contact after sales support help line mentioned in this manual.
For Permanently Installed LPG Supply or Natural Gas Use:
Barbeques which are connected to twin 45 kg LPG cylinders or to Natural Gas must be
installed by a licensed gasfitter, in accordance with the requirements of AS 5601, and local
gas authority requirements.
There are two approaches to installation:
Permanent Piped Connection : Your barbeque may be permanently connected to the main
gas lines or LPG cylinders via copper pipe. This must be done entirely by the gasfitter, in
accordance with requirements of AS 5601, and local gas authority requirements. Your
gasfitter will ensure that your barbeque is permanently connected to the supply via copper
pipe, the gas pressure in the lines is adequate, pipe sizes are correct, all connections are
9
BARBEQUE
CONNECTION TO
HOSE REGULATOR GAS BOTTLE
CONNECTION TO
HOSE REGULATOR