background image

Ethernet services

 EtherXtend User’s Guide

15

Frame Relay migration to E-LAN services

T1/E1 replacement with E-Line services, including internet access, 
wireless backhaul, voice access, and wholesale services.

Transparent LAN service (TLS)

EFM over copper technology supports a wide range of voice, data, and video 
services and applications. Many applications are extensions of those now 
supported by T1/E1 and Frame Relay services. However, they are more 
responsive to new demands by customers by providing much higher data 
rates.

Ethernet services

The Metro Ethernet Forum (MEF) has helped to define standards for Ethernet 
services. These standards helped to establish the user network interface and 
Ethernet virtual connection for two principal services: E-Line and E-LAN.

E-Line services

 include point-to-point Ethernet connections using Layer 2 

VLAN infrastructure with two types of user network interface (UNI) access: 
802.1Q-in-802.1Q (QinQ) and dot1Q encapsulation. These services are also 
known as Ethernet Relay Service (ERS) and Ethernet Wire Service (EWS).

E-LAN services

 provide multipoint-to-multipoint services using virtual 

private LAN services (VPLS) or simply layer 2 VLAN core.

Carrier Ethernet has developed a series of extensions to standard Ethernet that 
provide improved performance on the Internet. 

Содержание EtherXtend 3300 Series























































































































































Отзывы: