36
37
3) Video Parameters
b, Exposure: Exposure mode, exposure compensation,back light compensation,
anti-flicker,gain limit,DRC ,shutter speed, aperture value and
brightness can be set.
Exposure Mode:
Exposure compensation:
Exposure compensation value:
BLC:
Anti-flicker:
Gain limit:
Dynamic range:
Shutter speed:
Aperture value:
Brightness:
c, Color: White balance,saturation,Hue,white balance sensitivity,red tuning,
blue tuning, red gain and blue gain can be set.
White balance modes:
Red tuning:
Blue tuning:
a, Focus: Focus mode, focus range, focus sensitivity can be set.
Focus Mode: set the focus mode (the default auto, manual optional)
Focus range: set the focus range (the default middle, the upper and lower
optional)
Focus Sensitivity: Set the focus sensitivity (default is low, high, medium
optional)
Set the exposure mode (the default automatic, manual, shutter
priority,aperture priority,Brightness priority optional)
Exposure compensation setting is active when it is auto
status (default is off).
Set the exposure compensation value,valid when
it is set for auto(default -7,-7 ~7 optional).
Set back light compensation, valid when it is auto status (default is off).
Set up anti-flicker mode, valid when status of automatic, aperture or
brightness priority (default 50Hz,closed,60Hz optional).
set the gain limits,auto, active when it is status of aperture or brightness
priority(default 7,0-15 optional).
set the dynamic range (default 2,1-8 and OFF optional).
active when it is status of manual or shutter-priority (default 1 / 90,
1 / 90,1 / 100,1 / 1/120 / 180,1 / 250,1 / 350,1 / 500,1 / 725 1 / 1000,
1 / 1500,1 / 2000,1 / 3000,1 / 1/4000 / 6000,1 / 10000 optional).
Set the aperture value,active when it is status of manual or aperture
-priority(default F1.8,closed,F9.6,F8.0,F6.8,F5.6,F4.8,F4.0,F3.4,
F2 .8,F2.4,F2.0,F1.8 optional).
Set the brightness value,active when it is a state of brightness priority
(default 7,0-23 optional).
Set the white balance mode (the default automatic, 3000K,
4000K, 5000K, 6500K, manual, One-push optional).
Note: Click the “Correction” button when selected the One-push white balance mode.
red trimming only effective when set white balance AUTO,(default 0,
-10~10 optional)
blue trimming only effective when set white balance AUTO,(default 0,
-10~10 optional)
Saturation:
Auto white balance Sensitivity:
Hue:
White balance sensitivity:
Red Gain:
Blue Gain:
d, Image: Brightness, contrast, sharpness, black and white mode, Gamma, DCI,
Horizontal Flip, Vertical Flip and Digital zoom can be set.
Brightness:
Contrast:
Sharpness:
Black and white mode:
Gamma:
Dynamic contrast:
Flip Horizontal:
Flip Vertical:
Digital zoom:
e. Noise Reduction: 2D noise reduction,3D noise reduction and dynamic dead
pixel correction available.
2D Noise Reduction:
3D Noise Reduction:
Dynamic dead pixel correction:
Note: Click “Refresh”to make revision of any video parameters of a,b,c,d,e effective .
F. Style: default, standard, clear, bright and soft for options
Note: if the above a, b, c, d, e value changes, click refresh to take effect.
Set the saturation (default 100%, 60%, 70%,80%, 90%,100%, 110%,
120%,130%,140%, 150%,160%, 170%,180%,190%,200%,optional).
Sensitivity Auto white balance settings (default is
low,high,medium optional).
Set the chrome (default 7,0-14 optional).
default low, middle / high optional)
Set the red gain,effective when it is manual (default 145,0-255 optional).
Sets the Blue gain,effective when it is manual (default 56,0-255 optional).
Set the brightness (default 7,0-14 optional).
set the contrast (default 7,0-14 optional).
Set the sharpness value (default 4,0-15 optional).
Set black and white mode (default color,black/white optional ).
Gamma value setting (default,0.45,0.50,0.52,0.55 optional).
dynamic contrast setting(default close,1~8 optional)
Set Flip Horizontal (default Off,On optional).
Set vertical flip (default Off,On optional).
digital zoom setting((default Off,On optional).
Set 2D noise reduction level (default 3,1-7 and Off optional).
Set 3D noise reduction level (default 3,1-8 and Off optional).
Set Dynamic dead pixel correction (default Off,
1-5 optional).
4) Character-Overlapping
Display date and time:
Display Title:
Font Color of Time:
Font Color of Title:
Moving characters:
Title Content:
Time Content:
Set whether to display the time and date (default display).
Set whether to display the title (default display).
Set font color of time and date (default white,black,yellow,red,
blue optional).
Set font color of title (default white,black,yellow,red,blue optional).
Set the display position of moving date,time and title ,click on
the "up,down,left,right" buttons to move the corresponding
character position.
Set title content (default CAMERA1).
Set time content (default 1970/01/10 05:36:00)
Click on the "Save" button and display the "Save successful" message,then valid
!"#$
Information and Communication PTZ Camera
!"#$
Information and Communication PTZ Camera
