6
Installation and Operating Instructions
V02
2 Safety
2.1 Intended use
1. Zeverlution converts the direct current from PV arrays into grid-compliant
alternating current.
2. Zeverlution is suitable for indoor and outdoor use.
3. Zeverlution must only be operated with PV arrays (PV modules and cabling) of
protection class II, in accordance with IEC 61730, application class A.
Do not connect any sources of energy other than PV modules to the inverter.
4. PV modules with a high capacitance to ground may only be used if their coupling
capacity does not exceed 1.0
μ
F.
5. When the PV modules are exposed to sunlight, a DC voltage is supplied to this
device.
6. When designing the PV power plants, ensure that the values comply with the
permitted operating range of all components at all times. The free design program
‛Zeverplan“ (http://www.zeverplan.com ) will assist you.
2.2 Safety standards
Zeverlution complies with the EU Low-Voltage Directive 2006/95/EC and the EMC
Directive 2004/108/EC. Zeverlution also complies with the requirement for safety and
EMC in Australia and New Zealand market.
The inverters are labeled with the CE mark and RCM mark, fulfill the requirements
specified in the specific standards. For more information about certificates in other
countries and regions, please visit website (
http:// www.zeversolar.com
).
Содержание Zeverlution 1000S
Страница 1: ......
