Zeversolar Zeverlution 1000S, Инструкция по установке и эксплуатации

Страница: 51 / 69

50 Installation and Operating Instructions V02
9.3 Language and safety regulation settings
Before setting, switch on the DC switch, and ensure that the AC circuit breaker is
switched off and cannot be reactivated, while the inverter should be reliably
grounded.
9.3.1 Language setting
The inverter provides two languages: English and German.
Press the button for approx. 5s at the entry of ‛Set Language“ to enter the language
menu and select the language. The display will switch to current state information
automatically and the language setting will be saved at the same time unless you
press the button again within approximately 10s.
9.3.2 Safety regulation setting
There is a safety regulation setting function in the inverter. You can choose different
safety regulations according to the local requirements. If the inverters are installed
in Germany or Australia, you don’t need to set the safety regulation again because
the default setting is correct for these two countries. Set the safety regulation as
described below:
Step 1:
Connect the inverter to the PV generator, switch on the DC switch; the LCD displays
the following:
Step 2:
Press the control key (see section 9.1.1) approx. once per second until the LCD
display shows:
ZL ××××S
Pac= 0.0W
Error Code: 35
Pac= 0.0W