ZETRON 025-9623 D3, Руководство пользователя

Страница: 46 / 55

iRIM Configuration Reference
46 025-9623 D3
Note If you don’t know the password, contact Zetron Technical
Support.
STOP
Warning! Good cybersecurity practice requires changing the default
password immediately after logging in for the first time.
Continued use of default passwords is a significant security
vulnerability.
Allow FTP
If Allow FTP is enabled, then access by an FTP client is allowed in order to upload and
download configuration files and upgrade the unit’s firmware. If Allow FTP is disabled,
no access is allowed by FTP clients. The default is enabled (checked).
Allow Telnet
If
Allow Telnet
is enabled, then access by a Telnet client is allowed. This access should
not be necessary, as it is limited to certain trouble-shooting features. If
Allow Telnet
is
disabled, then no access is allowed by Telnet clients. The default is disabled (unchecked).
Channel Parameters
The channel parameters are duplicated on both the Channel A Configuration Page and
the Channel B Configuration Page . They may be set independently for each channel.
Radio Type
The radio type is selected from a drop-down list:
• If no radio is to be connected to the channel, select
None
.
• If an i365 radio is to be connected to the channel, select
iDEN Handheld
.
Selecting iDEN Handheld refreshes the page, adding several more parameters at
the bottom. These are described in
Parameters Specific to iDEN Handheld
on
page 48 .
TX Voice Delay
If TX Voice Delay is enabled, then voice delay is used on transmit audio to offset the
radio’s key-up delay. This can be especially useful on trunked radio channels. As soon as
the console sends a keying tone, the audio will be buffered. When the radio acquires a
channel, the audio will begin playing back. The length of the delay is equal to the channel
acquisition time. On a conventional channel, the radio keys-up immediately, and the
voice delay is unnoticeable. If the checkbox is not checked, then console audio sent while
the radio is acquiring a channel will be lost. The default is unchecked.