ZETRON 025-9623 D3, Руководство пользователя

Страница: 43 / 55

FTP Access
43
Reverting to a Previous Firmware or Configuration Version
If it becomes necessary to revert to a previous version of firmware or configuration, this
can be done from the versions page. If a previous version of firmware is available, there
will be a button labeled Revert to previous executable version. Clicking the button
causes the unit to copy the previous version of firmware over the current version of
firmware (which will take several seconds), and then brings up a page announcing that
the unit is rebooting and providing a button labeled Reconnect that brings up the login
screen once the product has finished rebooting.
If a previous version of the configuration is available, there will be a button labeled
Revert to previous configuration on the versions page. Clicking the button causes the
unit to copy the previous configuration over the current configuration and begin using
that configuration immediately. Note that changes to the IP Address , Netmask , and
Gateway will not take effect until the iRIM is rebooted. This may be accomplished by
pressing the Reboot Radio Interface Module button on the main page.
Rebooting the iRIM
There are times when it is desirable to reboot the iRIM remotely, most notably after
changing its
IP Address
,
Netmask
or
Gateway
. Instead of these parameters taking effect
immediately and ending your configuration session, they do not take effect until the unit
is rebooted. This can be accomplished by clicking on the
Reboot Radio Interface
Module
button on the main page. Doing so brings up a page announcing that the unit is
rebooting and providing a button labeled
Reconnect
that brings up the login screen once
the product has finished rebooting.
Logging Out
When you are done accessing the iRIM with a web browser, click Logout on the main
page to end the session.
FTP Access
Uploading a saved configuration file to a Radio Interface Module or upgrading its
executable requires the use of an FTP client. Any FTP client may be used, including the
one that comes with Windows.
♦ To access the FTP Client in Windows
1. Type ftp
IP_address
at the command line from the directory containing the
configuration or firmware files, where
IP_address
is the IP address of the
unit.