ZETRON 025-9623 D3, Руководство пользователя

Страница: 11 / 55

Mounting the iRIM and iRIM Adapter
11
Table 1: iRIM DIP Switches
Switch Purpose Positions
A Network Parameter Select — Selects whether to use
the configured network parameters or the default
network parameters. For more information, refer to
PC to iRIM Direct Connection on page 40 .
UP – Use the configured IP address
DOWN – Use the default IP address
(see switch B)
B IP Address Default — Selects which IP address to use
for the default. For more information, refer to PC to
iRIM Direct Connection
on page
40
.
UP – 192.168.0.1
DOWN – 192.168.0.133
C Unused Unused
D Fast Boot — Enables or disables the power-on RAM
test.
UP – Perform RAM test on boot up
DOWN – Fast boot
Mounting the iRIM and iRIM Adapter
This section is only relevant to rack-mount devices. For desktop devices, skip to the next
section: Connecting the Components on page 12 .
The iRIMs and iRIM adapters are designed to be either free-standing devices or, with a
special top cover, rack-mount devices. A free-standing iRIM or adapter has no mount
points. An iRIM or adapter with a top cover meant for rack mounting has two “ears” with
a total of four holes. In the rack-mount configuration, there can be up to two iRIMs per
their mounting plate kit (P/N 950-0588) and up to two iRIM adapters per their mounting
plate kit (P/N 950-0898). A single unit rack mount plate kit is also available for iRIMs
(P/N 950-0589), but not iRIM adapters. The following figure shows two iRIMs in a dual
unit rack mount plate kit.
Ethernet Power
Radio Interface Module
Status Line Radio
TX
RX
Channel A
Status Line Radio
TX
RX
Channel B
Ethernet Power
Radio Interface Module
Status Line Radio
TX
RX
Channel A
Status Line Radio
TX
RX
Channel B
Height 1.75 inches (1 RU)
Width 19 inches
Depth 10 inches