ZETRON 025-9623 D3, Руководство пользователя

Страница: 42 / 55

iRIM Configuration Reference
42 025-9623 D3
When the parameters have been set to the desired states, click
Submit
to remember those
changes, although they will not take effect yet. At any time, click
Cancel
to discard the
changes.
Upon selecting Submit if any parameters were set to invalid values, the page will
redisplay with the invalid parameters shown in red. These parameters must be set to valid
values or the changes discarded in order to continue.
Once all the parameters have been set to valid values, the
View/Modify Configuration
page will again display, this time with a notice that changes have been made to the
configuration. Two buttons reading Save Changes and Discard Changes will also
replace the Return to Main Page button. Further changes may be made on any of the
pages without affecting the operation of the unit.
When the entire configuration has been modified as desired, click Save Changes to save
the configuration to flash; the iRIM will begin using the new settings. Or, click Discard
Changes to leave the existing configuration unchanged. In either case, you will be
returned to the main page.
Saving the Configuration to Disk
Saving a copy of the configuration to disk is useful for cloning multiple units or for
backing up the configuration. To save a copy of the configuration to disk, follow the
instructions on the main page by right-clicking the this link option and selecting the Save
Target As entry on the context menu. Use the Save As dialog box to select the file name
and location for the file.
Saving the Event Log to Disk
During operation, the iRIM logs any errors and unexpected conditions into an event log.
If there is a problem with the unit, this event log may be saved to disk and returned to
Zetron Technical Support for further diagnostics. To save the event log to disk, follow the
instructions on the main page by right-clicking the this link option and selecting the Save
Target As entry on the context menu. Use the Save As dialog box to select the file name
and location for the file.
Viewing the Firmware and Configuration Versions
To view the firmware and configuration versions loaded into the iRIM, click
Versions
on
the main page. This brings up a page displaying the version, size, CRC, and status of the
bootloader, failsafe, and both executable images. It will also display the name and status
of both copies of the configuration.
The firmware and configuration labeled Current is the one that is currently being used
and will continue to be used. A firmware or configuration labeled Previous is a backup
that can be changed to Current by reverting to the previous executable or configuration.