Zetor CRYSTAL HD 150, Руководство оператора

Страница: 135 / 234

Standard and economical independent revolutions of rear PTO shaft
FHD18N044
The system used for the specific tractor is marked on the sticker located at the rear PTO shaft speed lever.
This system only has independent rear PTO shaft revolutions speed.
A - Standard PTO shaft speeds are shifted
N - Neutral position (Rear PTO shaft terminal can be rotated freely.)
B - Economic PTO shaft speeds are shifted
When the standard PTO shaft speed is selected (A), the rear PTO shaft speed selector can be set to 540 or
1,000 revolutions of the rear PTO shaft.
When the economic PTO shaft speed (B) is selected, the rear PTO shaft speed selector can be set to 540E
or 1,000E revolutions of the rear PTO shaft.
The lever is located on the right side of the driver's seat. Raise the ring in the direction of the arrow (C) to
move the lever.
The selected economic PTO shaft speed is indicated by the E symbol displaying behind the selected PTO
shaft speed in the dashboard display.
Dependent and independent rear PTO shaft revolutions
FHD18N045
The system used for the specific tractor is marked on the sticker located at the rear PTO shaft speed lever.
This system only has 540 or 1,000 rpm rear PTO shaft speed.
A - Dependent PTO shaft speeds shifted ( PTO SYNCHRO )
N - Neutral position (rear PTO shaft terminal can be rotated freely.)
B - Independent PTO shaft speeds shifted
When dependent (A) or independent (B) PTO shaft speed is shifted, the rear PTO shaft speed selector can
be set to 540 or 1,000 revolutions of the rear PTO shaft.
The lever is located on the right side of the driver's seat. Raise the ring in the direction of the arrow (C) to
move the lever.
Dependent PTO shaft speeds shifted are indicated on the dashboard display by not displaying the selected
PTO shaft speed. Real rear PTO shaft speed is displayed.
DRIVE OF AGRICULTURAL MACHINERY
134