Zeroplus LAP-C(16032), Руководство пользователя

Страница: 84 / 130

Smart+
User’s Manual V1.04.04
84 FM07I4A
Step 4 . Click Finish to confirm adding A0, A1 and A2.
upgraded.
4.11 Connect Multiple smart+
For Logic Analyzers with the same model, users can connect their hardware and make them work together by using the
software, so as to enhance the logic analysis capability, which represented by increased RAM size and channel quantity.
Memory Stacked : When the Memory of the first Logic Analyzer is full, a signal of Rising Edge will be sent out from
the S_O Port to the second Logic Analyzer, which will start capturing data. Then the third, the fourth…The software
will process the data captured by all Logic Analyzers.
Channel Stacked : The sampling parameters of all Logic Analyzers are set to the same. One signal will be sent to the
synchronization channels, at that time all Logic Analyzers start capturing data together. The software will process the
captured data.
For the Memory Stacked, if two Logic Analyzers are used to stack and their Memory size are all 128K, then the 256K
data can be captured. Since one channel is used as the synchronization channel, so 31 channels are available to capture
data.
Channel Stacked can increase the channel quantity. Take LAP-C(322000) for an example. If two Logic Analyzers are
used to stack, then the total channel quantity will become 64, except one synchronization channel for each Logic
Analyzer, there are 62 channels to capture data.
4 Logic Analyzers at most can be stacked. Models supporting Multi-stacking: LAP-C(32128), LAP-C(322000) and
LAP-C(321000).
Click Hardware(H)

Connect Multiple smart+.