Zeroplus LAP-C(16032), Руководство пользователя

Страница: 24 / 130

Smart+
User’s Manual V1.04.04
24 FM07I4A
2.3 Tips and Advice
1. During testing, make sure that the internal sampling frequency of LA be at least four times higher than the frequency
of device under test.
2. If the connector of testing cable does not work well with the pins of device under test, try to use the supplied probe.
Fig. 2-1: Probe Supplied by Zeroplus
3. How to use the probe:
Fig. 2-2
Fig. 2-3
Step 1: Insert the loose end of the
cable into the connect pin of probe.
(Fig. 2-2).
Step 2: Compress the probe as shown
to reveal two metal prongs. Insert the
metal prongs into the metal connector
of device under test and release to let
them to grip the metal connector.
(Fig. 2-3).
4. If the internet is available, the Logic Analyzer will connect with the Zeroplus Server automatically and search for
update.
5. Unwanted signals can be filtered by the “Signal Filter” or “Signal Filter Delay” function.
6. During long-time measuring, “Compression” function can increase the memory’s efficiency.
7. Trigger condition depends on the device under test. If trigger can’t be activated, try to widen the trigger conditions.
8. If the frequency of device under test is out of the range of internal sampling frequency of LA, use the external
frequency as the external sampling frequency.