Zeroplus LAP-C(16032) Скачать руководство пользователя страница 36

Страница: 36 / 130

Smart+

User’s Manual V1.04.04

FM07I4A

3.3

Right Key Menu

3.3.1 Right Key Menu of Channel Column

Add Channel/Bus

: Add Channel, Bus or Protocol Analyzer.

Copy

: Copy the selected channel or Bus/Protocol Analyzer. Using along with Shift or Ctrl key can copy more channels

or Buses/Protocol Analyzers together.

Paste

: Paste the copied channel(s) or Bus(es)/Protocol Analyzer(s).

Delete

: Delete the selected channel or Bus/Protocol Analyzer. Using along with Shift or Ctrl key can delete more

channels or Buses/Protocol Analyzers together.

Rename

: Rename the selected channel or Bus/Protocol Analyzer.

Bus/Protocol Decoder Property

: Pop up the Bus/Protocol Analyzer property interface to set relevant parameters.

Different Bus/Protocol Analyzer has difference interface.

Numeric Base/Encoding

The data format includes Binary, Decimal, Decimal(signed), Hexadecimal, ASCII, Gray

Code and Complement. The default is Hexadecimal.

Image

code

: It is used to analyze the data format of Protocol Analyzer and display its decoded data in image

(Protocol Analyzer shall support this function).

Draw Analog Waveform

: The Bus data is not just displayed by pure data, but also by curve that indicates the data

change and looks like a waveform. The Analog Waveform has three modes: Hide, Signal Analog Display and Mixed

Analog Display.

Reverse Signals

: Reverse the selected channel, that’s mean the high level is displayed as low level, and vice versa. The

waveform is showed by dotted line and the channel name is marked by blue line. For example:

. Each channel can

be reversed separately. Using Ctrl or Shift key can reverse more channels together.

Restore Channels to Default

: Restore all the settings in the Bus/Signal column to the original status.

Note

: Move the cursor to the bottom line of channel, the cursor will turn into

;

holding the left key and drag to

adjust the height of channel.

Содержание LAP-C(16032)



































































































































Результаты поиска

Содержание LAP-C(16032)

Отзывы:

Похожие инструкции для LAP-C(16032)

Бренды по названию

Популярные бренды

Zeroplus LAP-C(16032), Руководство пользователя

Результаты поиска

Содержание LAP-C(16032)

Отзывы:

Похожие инструкции для LAP-C(16032)

Бренды по названию

Популярные бренды