Zeroplus LAP-C(16032), Руководство пользователя

Страница: 66 / 130

Smart+
User’s Manual V1.04.04
66 FM07I4A
If this function is not activated, click the icon “Trigger Condition Setting” to pop up the purchase dialog box, in which
click “Purchase” to login ZPP Store to purchase this function.
4.6.4 Trigger and Find (Trigger Option)
Click the button of “Trigger Option” can expand or collapse the trigger options.
Trigger Level(Voltage) : There are TTL, CMOS(5V), CMOS(3.3V), ECL and User Defined to choose, the default is
TTL. In the User Defined mode, the value range is -6.0-+6.0 (-5.0-+5.0 for LAP-D Models).
Trigger Position : The value range is 0%-100%, users can input the value or select it from the pull down menu; it is
10% by default.
Trigger Page : After set the “Trigger Position” or “Trigger Count”, users can set the “Trigger Page” to capture the
needed data. Trigger Page means your data is divided into many pages. The size of each page is the RAM size. The
page when the trigger point locates is the first page. If the data captured each time is same and the trigger condition
keeps unchanged, then after analyze the data of first page, users can set the Trigger Page to 2 and start the Logic
Analyzer again. The data of second page is displayed in the waveform display area. The data of two pages are
continuous. When analyzing huge data, users can save the data page by page and then begin to analyze. The Trigger
Page can be set between 1 and [(1trigger position)/RAM size]. Trigger Page is disabled for D Series.
Applicable
Models
LAP-C
（
16032
）
LAP-C
（
16064
）
LAP-C
（
16128
）