Zeroplus LAP-C(16032), Руководство пользователя

Страница: 118 / 130

Smart+
User’s Manual V1.04.04
118 FM07I4A
5.1 Hardware
H01. Is it ok to substitute bundled cables with common cables or purchased cables?
A: Yes. But it is better to use the bundled cables to connect the object under test and the Logic Analyzer, to ensure
the data accuracy.
H02. Does Zeroplus manufacture grippers? How may I purchase grippers?
A: Yes, gripper is one of our products, please contact our sales department for purchasing.
H03. Is the memory size fixed? Using one port can expand the memory size?
A: Yes, the memory size is fixed, it will not change with the port number. But for LAP-C(162000) and
LAP-C(322000), they can use the Double Mode to double the memory, but only A, B Port(16ch) can be used. For
LAP-D models, their memory can double twice, but the pin number will decrease as 32ch

16ch

8ch. For instance,
LAP-D(32512M), its memory can double twice as 512M

1G

2G(the highest in industry).
H04. Are different external sampling frequency for different channel possible?
A: No, only one external sampling frequency is available.
H05. Can any port be set to disabled during compression? Which one?
A: No, D port has been set to be disabled during compression (LAP-D Series models don’t support compression).
H06. Why the negative voltage can do level setting?
A: This allows users to analyze any signal conveniently.
H07. How to adjust the Trigger Level?
A: The Trigger Level is adjusted with one port(8 channels) as the unit.
H08. Hardware compression or software compression?
A: For time efficiency, the Logic Analyzer uses hardware compression.
H9. Does different memory size have different memory page size?
A: Yes, the page quantity is different according to the memory size.
H10. Is the Logic Analyzer expandable? How to expand?
A: Yes, the Logic Analyzer has a perfect expand capability. Users can connect external modules to expand.
H11. Why I have to install the driver every time when using a different Logic Analyzer on the same computer?
A: Since each Logic Analyzer has an unique serial No., users must install the driver again when using another Logic
Analyzer.
H12. Why is the captured data unstable?
A: Check the USB cable is original or not. The USB port that connecting with computer should have no expanded cable.
If USB Hub is used, recommend using the USB port on the computer. All is to avoid noise disturbance during data
capturing.