AEROLYTE 6060A and 7070A G2 PRESSURE CABINETS
Page 32
© 2016 CLEMCO INDUSTRIES CORP.
www.clemcoindustries.com
Manual No. 27789 Rev. A, 10/16
9.10
Reclaimer, for 16
Dia. Blast Machine
Figure
36
NOTE: Flex hose, clamps and lower adhesive-backed
gasket are not supplied with replacement reclaimers.
Item Description
Stock
No.
1.
Gasket, 5/16" x 1" adhesive-backed,
specify feet required, 5 feet used .......... 00187
2.
Inlet pipe adaptor
900 cfm, 6" ............................................. 12363
3.
Gasket, inlet adaptor
900 cfm 6" .............................................. 11759
4.
Wear plate, rubber-lined w/mntg screws
900 cfm with bolt-on top ........................ 25071
5.
Screen assembly,
4.5 mesh without magnets ..................... 21275
4.5 mesh with magnets .......................... 23146
6. Door
assembly,
w/gasket and latch .......... 14271
7.
Gasket, door .............................................. 11745
8. Spring
latch
assembly ............................... 12263
9.
Gasket, 2" adhesive-backed, per foot,
specify ft. required ................................. 13089
10.
Vortex cylinder assembly, adjustable,
900
cfm
.................................................. 23046
11.
Top assembly, 900 cfm
23040
12.
Eyebolt 3/8-NC .......................................... 00430
13.
Adaptor, 16
″
dia. blast machine, 900 cfm ... 23043
14.
Body section with door and wear plate
for reclaimers with bolt-on top only ........ 27465
*15.
Hose, light-lined flex, specify feet required
6" ID for 900 cfm .................................... 12468
*16. Clamp,
hose
For 900 cfm, 6-1/2" ................................ 00750
*17.
Hose support inlet, optional for 900 cfm only
6",
standard
use ..................................... 16887
*18.
Hose support, 7" outlet, option for 900 .... 20619
Figure 36
*These items are not included
with replacement reclaimer.
Order separately if needed.
1
2
9
9
9
3
4
5
8
6
7
10
11
12
14
*16
*15
*17
13
*18
