Zero 88 01-201-00, Руководство по эксплуатации

Страница: 20 / 34

Supply Status
This menu option allows the user to
view the voltage and frequency for
each phase of the supply on networked
Spice dimmers.
This data is not available from Chilli
Pro dimmers.
Select the Supply Status option from
the Dimmer Control menu options:
<Supply Status >
Press the ENT key. The LCD shows
the following screen:
Dimmer Number
XX
Use the numeric keys or cursor keys to
select the required dimmer number,
then press the ENT key.
If the selected dimmer is a Spice
dimmer, the LCD shows the following:
Dim: 1 PH: 1
240V 50 Hz
A cursor is displayed in the phase field.
Use the numeric keys or cursor keys to
select a phase (1-3).
The corresponding voltage and
frequency for the selected phase of the
dimmer is displayed on the LCD.
If the frequency is < 40 Hz the
frequency field shows “Low”; if the
frequency is > 70 Hz the frequency
field shows “High”.
If the selected dimmer is a Chilli Pro
dimmer, the LCD shows the following:
Supply Status
Not Available
Press the ESC key to return to the
Supply Status screen.
Output Calibration
This menu option allows the user to
limit the maximum output voltage on
networked Spice dimmers.
This function is not available on Chilli
Pro dimmers.
Select the Output Cal option from the
Dimmer Control menu options:
< Output Cal >
Press the ENT key. The LCD shows
the following screen:
Dimmer Number
XX
Use the numeric keys or cursor keys to
select the required dimmer number,
then press the ENT key.
If the selected dimmer is a Spice
dimmer, the LCD shows the following:
State : OFF
Voltage : 220
A cursor is displayed in the State field.
Use the cursor keys to set the State to
On , then press the ENT key to move
the cursor to the Voltage field.
Use the numeric or cursor keys to set
the required voltage (190 - 240V).
Press the ENT key to confirm and
return to the
Output Cal screen.
If the selected dimmer is a Chilli Pro
dimmer, the LCD shows the following:
Output Cal
Not Available
Press the ESC key to return to the
Output Cal screen.
Diagnostics
This option allows the user to
investigate network, device or DMX
faults with the dimmers on the network.
Select the Diagnostics option from the
Dimmer Control menu options:
< Diagnostics >
Press the ENT key. The LCD shows
the following screen with data on the
first dimmer on the Chilli network:
Num Temp DMX Net
001 0 1 0
The information displayed on this
screen is as follows:
Num - The dimmer number (001-128).
Temp - The temperature status of the
dimmer (0 = OK, 1 = fault).
DMX - The DMX status of the dimmer
(0 = OK, 1 = fault).
Net - The network status of the dimmer
(0 = OK, 1 = fault).
Use the cursor keys to view diagnostic
information on each of the dimmers on
the Chilli network.
Press the ENT or ESC key to return to
the
Diagnostics screen.
3 - 12
Chilli Master Controller 73-861-00 Issue 3
User Interface