background image

Dimmer Control

This option is only available when the
lock level is set to zero.

Select the 

Dimmer Control

 option from

the top level menu options:

<Dimmer Control>
                

Press the ENT key to enter the
Dimmer Control sub-menu. 

The following menu options are
available:

Manual Control

Preheat

Dimmer Laws

Topset

Reset

DMX Controls

Chilli Net

Supply Status

Output Cal

Diagnostics

Area Control

Use the cursor keys to select the
required menu option.

Press the ENT key to enter the
corresponding sub-menu.

Manual Control

Select the 

Manual Control

 option from

the menu options:

<Manual Control>
                

Press the ENT key to enter the Manual 
Control sub-menu. 

The following menu options are
available:

Set Chan Level

Set All Chans

Set Area Chans

Set Channel Level

This option allows the user to set up a
manual control level for each of the
master channels. The minimum
manual control level is 0%, the
maximum level is 100%.

Select the 

Set Chan Level 

option from

the menu:

<Set Chan Level>
                

Press the ENT key. The LCD shows:

(A01)Channel: xx
     Level: xxx 

A cursor is shown in the 

Channel

 field.

The channel number defaults to 1.

When the cursor is displayed in the

Channel

 field:

Keypad

 - Enter the channel number

using the numeric keys then press the
ENT key. The cursor moves to the

Level

 field.

Cursor Keys

 - Use the cursor keys to

select the channel number. As the
channel number changes, the
corresponding manual control level is
shown in the 

Level

 field. Press the

ENT key. The cursor moves to the

Level

 field

When the cursor is displayed in the

Level

 field:

Keypad

 - Enter the required channel

level (0 - 100) using the numeric keys
then press the ENT key.

Cursor Keys

 - Use the cursor keys to

adjust the level, then press the ENT
key. 

The output of the master channel
matches the level entered, and the
cursor returns to the 

Channel

 field. 

The # key can also be used to toggle
the manual control level between 0%
and 100% - see notes.

Pressing the ESC key at any point on
this screen will return the screen to the

Set Chan Level

 screen.

3 - 2 

Chilli Master Controller 73-861-00 Issue 3

User Interface

Содержание 01-201-00



































Отзывы: