Zephir Z-1446-E, Инструкция по эксплуатации

Страница: 6 / 36

_ English _
cream or cheese.
KEEP WARM
Bread can be automatically kept warm for 1 hour after baking. During keeping warm, if you would like to
take the bread out, switch the program off by pressing the START/STOP button.
NOTE : The programs of DOUGH and JAM do not have the function of keep warm.
MEMORY
If the power supply has been interrupted during the course of making bread, the process of making bread
will be continued automatically within 10 minutes, even without pressing START/STOP button. If the
interruption time exceeds 10 minutes, the memory cannot be kept, you must discard the ingredients in the
bread pan and add the ingredients into bread pan again, and the bread maker must be restarted. But if the
dough has not entered the rising phase when the power supply breaks off, you can press the START/STOP
directly to continue the program from the beginning.
ENVIRONMENT
The machine may work well in a wide range of temperature, but there may be difference in loaf size
between a very warm room and a very cold room. We suggest that the room temperature should be within
the range of 15°C to 34°C.
WARNING DISPLAY
1. If the display shows “ HHH ” after you have pressed START/STOP button, 5 beeps will be heard, it
prompts that the temperature inside is still too high and the program will not be performed. Open the lid
and let the machine cool down for 10 to 20 minutes.
2. If the display shows “ LLL ” after you have pressed START/STOP button, 5 beeps will be heard, it
means that the temperature inside of bread pan is too low. The bread maker shall be placed into
environment of higher temperature for use (Except the program of BAKE ).
3. If the display shows “ EE0 ” after you have pressed START/STOP button, beeps will be heard, it means
the temperature sensor has open circuit. Press
START/STOP
button to stop beeps sound, but the “
EE0
”
on the LCD will continue flashing. Please have the appliance checked by the authorized service center. If
the display shows “ EE1 ”, it means that the temperature sensor has short circuit.
BEFORE USING FOR THE FIRST TIME
The appliance may emit a little smoke and a characteristic smell when you turn it on for the first time. This
is normal and will soon stop. Make sure the appliance has sufficient ventilation.
1. Please check whether all parts and accessories are complete and free of damage.
2. Clean all the parts according to the section “ Cleaning and Maintenance ”.
3. Set the bread maker on BAKE mode and bake empty for about 10 minutes. Then let it cool down and
clean all the detachable parts again.
4. Dry all parts thoroughly and assemble them, the appliance is ready for using.
USING YOUR BREAD MAKER
1. Place the appliance on a firm and even surface.
2. Place the bread pan in position, open the lid by lifting any lid lug and fix the kneading blades onto the
drive shaft. It is recommended to fill hole with heat-resisting margarine prior to place the kneading blade
to avoid the dough sticking the kneading blade, also this would make the kneading blade be removed
from bread easily.