Square TMD-Display
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
59
Scene
Figure 46
Individual Button – Scene.
Action
: sets whether the value to be sent to the KNX bus (through “
[General]
Scene: send
”) when the user touches the button will always be a scene run
request (“Run scene”) or –depending on the length of button press– a scene
run or save request (“Run (short press) + Save (3s press) scene”).
Scene number
: number of the scene (1 – 64) to be sent to the bus, both in
the case of the run requests and the save requests.
LED illumination control
: analogous to the homonymous parameter for all
the above functions (see previous pages). The options in this case are
“Regular”, and “Dedicated object”.
Scaling Constant
/
Counter Constant
/
Float Constant
Figure 47
Individual Button - Scaling Constant.
Value
: sets the value to be sent to the KNX bus when the user touches the
button. The available range and the object through which the value is sent
depends for each case, as the table below shows.
In case of selecting Counter Constant, two specific parameters (“
Size
” and
“
Signed
”) will be displayed to respectively define the size of the constant (“1
byte” or “2 bytes”) and whether it is a signed value or an unsigned value.
Depending on that, the range and the name of the object will vary.