Square TMD-Display
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
58
Two Objects (Short Press / Long Press)
Figure 45
Individual Button – Two Objects (short press / long press).
Long Press Threshold Time
: sets the minimum time the user should hold
the button in order to consider it a long press. The available range is 5 to 50
tenths of a second, being 5 tenths the default value.
Action on Short press
: sets the value to be sent to the bus (through “
[Btn]
[In] Two switches - Short press
”) when the user short-presses the button.
The options are “Send 0”, “Send 1”, “Toggle 0/1” and “Send 1-byte value”. In
case of selecting the latter, an additional parameter (“
Value
”) will be
displayed to enter the desired one-byte value (0 - 255).
Action on Long press
: sets the value to be sent to the bus (through “
[Btn]
[In] Two switches - Long press
”) when the user long-presses the button.
The options are the same as for the short press.
LED illumination control
: analogous to the homonymous parameter for the
“Disabled”, “Binary” and “Hold & Release” functions (see previous pages).
The options in this case are “Regular”, “State dependent” and “Dedicated
object”.
Selecting “State dependent” brings an additional parameter, “
LED
Illumination State Object
”, to make the state of the LED correspond either
to object “
[Btn] [In] Two switches - Short press
” (“Short Press Object”) or to
object “
[Btn] [In] Two switches - Long press
” (“Long Press Object”).
