Zennio Z35, Руководство пользователя, Страница: 32 / 98

Z35
http://www.zennio.com Tecnical Support: http://support.zennio.com
32
Time to Exit Cleaning Status [ 5... 15
…65535
][ s ] [
1…65535
][ min/h ]: timeout to
deactivate the cleaning function once triggered.
Cleaning Status Notification [ Disabled / Display Message ]: sets whether to
show a message during the cleaning state. When
“Display Message” is selected,
the following parameters appear:

Message [
Cleaning…
]: textbox to enter the desired message.

Notify Expiration [ No / Blink Message / Play Sound / Both ]: sets whether
to notify the timeout expiration or not. When any of the three later options is
selected, a new parameter shows up:

Lenght of the Warning [ 1... 5
…65535
][ s ] [
1…65535
][ min/h ]: sets the
ahead-time to start the notification prior to the end of the cleaning
function.
The “
[General] Cleaning Function
” one-bit object triggers the cleaning function when it
receives a “1” from the KNX bus.
3.1.10.2 WELCOME GREETING
This function permits showing the user a welcome message of up to four lines of text
on the display, each of which can be object-dependant or set in parameters.
Figure 19. W elcome Greeting Pop up.
When a “1” is received through the welcome greeting one-bit object, the display will show
the welcome text. The same will happen if any of the 14-byte objects that define the text
lines receives a new value from the bus.
The message disappears when touching the screen.