Z35
http://www.zennio.com
Tecnical Support:
http://support.zennio.com
27
Figure 14.
Touch Locking.
In this tab you can configure the blocking of the presses on the display.
1-Bit Object
[
disabled/
enabled
]: enables the 1-bit object
“
[General] Touch
Locking
” to trigger the touch lock.
Value
[
0 = Unlock, 1 = Lock
/ 0 = Lock, 1 = Unlock
]: parameter to select
which value should trigger which action when received through the indicated
object.
Scene Object
[
disabled
/enabled
]: enables the touch locking and unlocking when
receiving the configured scene
value through the object (“
[General] Scene:
receive
”).
Lock: Scene Number (0 = Disabled)
[
0/
1
…64
]: scene number that locks
the touch.
Unlock: Scene Number (0 = Disabled)
[
0/
1
…64
]: scene number that
unlocks the touch.
Push Button Notification
[
Disabled/
Display Message
]: sets whether to display
a message on the screen or not when the device is locked and the user attempts
to touch a button. When the first one is selected, one textbox (
Message
) appears
to enter the desired message.
3.1.9
SOUNDS
Z35 emits
3 types of sounds
, depending on the action performed:
Press Confirmation:
short beep indicating that the user has pressed a button.
This only applies to step controls, i.e., controls that walk through a certain range
of values and that do not send a value after every touch, but only the final value