Securel v3
Technical Support:
12
ETS PARAMETERISATION
The
opening object
is configured from the
“General” tab (see section 2.1) and the
following parameters are available:
Figure 4.
Opening Object - Configuration
Opening Object
[
disabled/
enabled
]
:
enables the “
[Access] Open Door
”
one-bit object, which activates the door opening.
Important:
To ensure the inviolability of the system, this object should be
associated with a group address configured as secure.
➢
Value
[
0/
1
]: value to be sent to trigger the door opening.
Opening Object Lock
[
disabled
/enabled
]:
enables the 1-
bit object “
[Access]
Lock Opening Object
” which locks the action of the opening object
(
“
[Access] Open Door
”).
➢
Lock Object Polarity
[
0 = Unlock; 1 = Lock /
0 = Lock; 1 = Unlock
]:
defines the value to send to lock/unlock the door opening via object.
➢
State After Download
[
Unlock
/ Lock
]: defines whether, after an ETS
download, door opening through object is to be initiated locked or
unlocked.
2.1.2
SERIAL CHANNEL
The serial channel is the channel through which communication will be established
between Securel v3 and the access management module that has such direct
communication, e.g. IWAC Display v3. For such communication to be possible, the
serial channel must be enabled and both devices must be
paired
. The purpose of the
