Securel v3
Technical Support:
3
1
INTRODUCTION
1.1
SECUREL v3
Securel v3
from Zennio is an actuator with
KNX Secure
presented as a secure system
for closing and opening doors of access-controlled rooms.
Uses two types of communications to connect with access control devices:
Encrypted serial channel
communication. This type of communication
requires a
pairing
process which will be explained below.
KNX bus
communication. In order to ensure secure communications
between both devices,
group addresses configured with KNX security
must be used.
For detailed information about the functionality and the configuration of the
KNX Secure, please refer to the specific manual
“
Security KNX
” available in
the Securel v3 product section at the Zennio website (
In order to know the type of communication allowed by the access control module to be
used together with Securel v3, please consult the specific manual of each device.
The most notable features of Securel v3 are:
Acting on electric strike
using semiconductor element.
Encrypted serial communication
with the access control device for door
opening.
KNX communication
with the access control device via a
KNX secure
object
.
Configuration of the
door opening time
.
LEDs indicator
of device status.
Manual control
of opening door.
Door opening locking
.
Heartbeat
or periodical “still-alive” notification.
