Securel v3
Technical Support:
10
2
CONFIGURATION
After importing the corresponding database in ETS and adding the device into the
topology of the desired project, the configuration process begins by entering
Parameters
tab of the device
.
2.1
GENERAL
The only parameterizable screen available is
“General”. All device functions can be
configured from this screen.
ETS PARAMETERISATION
Figure 2.
General.
Relay Configuration:
➢
Opening Time
[
10…
30
…150
] [
x0,1s
]: time the lock remains open after
receiving the opening command. The maximum recommended opening
time will depend on the lock type.
Opening Object.
Detailed functionality in section 2.1.1.
Serial Channel.
Detailed functionality in section 2.1.2.
Functions:
