Zennio KEM, Руководство пользователя, Страница: 29 / 49

KEM
http://www.zennio.com Technical Support: http://support.zennio.com
29
In this case, when at least one of the partial registers is enabled, the following
4-byte objects appear:
“[Heat Qty][Chx][PRn] Heat Quantity”
and
“[Heat
Qty][Chx][PRn] Cool
Quantity”
or
“[Heat Qty][Chx][PRn] Heat/Cool
Quantity”.
. See section 2.4.2.2
2.4.2 HEAT QUANTITY X
On this screen the options related to heat quantity channel objects can be configured.
ETS PARAMETERISATION
The parameters shown in each channel tab are the following:
Figure 20. Heat Quantity - "Heat Quantity x" tab
Channel Description : the name set in this text box will be the ETS channel
name.
Water Sensor Channel [ Channel 1 /
… / Channel 4
]: sets which water channel
is used for flow measurement in the calculation of the calorific energy.
Forward Temperature Probe [ Input 1
/ … / Input 5
]: determines the input to
which the temperature probe of the climate circuit forward zone is connected.
Return Temperature Probe [ Input 1
/ … / Input 5
]: determines the input to
which the temperature probe of the climate circuit return zone is connected.
One Object for Heat and Cool Quantity? [ No / Yes ]: allows to configure
whether the objects of heat and cool quantity are independent or all the calorific
energy is stored in the same object (
“[Heat Qty][Chx][TR] Heat/Cool
Quantity”
).