Zennio KEM, Руководство пользователя, Страница: 12 / 49

KEM
http://www.zennio.com Technical Support: http://support.zennio.com
12
Notifications [ enabled / disabled ]:
enables or disables the “Notifications” tab
on the left menu. See section 2.5 for more details.
Alarms [ enabled / disabled ]: enables or
disables the “Alarms” tab on the left
menu. See section 2.6 for more details.
Inputs [ enabled / disabled
]: enables or disables the “Inputs” tab on the left
menu. See section 2.7 for more details.
Logic Functions [ enabled / disabled ]: enables or
disables the “Logic
Functions” configuration screen on the left menu. See section 2.8 for more
details.
Heartbeat (Periodic Alive Notification) [ enabled / disabled ]: incorporates a
one-
bit object to the project (“ [Heartbeat] Object to Send ‘1’ ”) that will be sent
periodically w
ith value “1” to notify that the device is still working (still alive).
Figure 3. Heartbeat
Note: the first sending after download or bus failure takes place with a delay of
up to 255 seconds, to prevent bus overload. The following sending match the
period set.
The communication objects available by default are
“
Date
” and “
Time of Day
”. See
section 1.5 for more information about the behavior of these objects.
2.1.2 PARTIAL REGISTERS: GLOBAL CONFIGURATION
In this tab you can configure the periodic reset of partial registers.
In order for this tab to be displayed, it is necessary to have at least one partial record
enabled for one of the magnitudes (electricity, water or heat quantity). See sections 2.2.1,
2.3.1 and 2.4.1.