Zennio KEM, Руководство пользователя, Страница: 14 / 49

KEM
http://www.zennio.com Technical Support: http://support.zennio.com
14
2.2 ELECTRICITY
Within this tab, all the parameters related to electricity consumption monitoring are
configured.
2.2.1 CONFIGURATION
On this screen, the basic configuration common to all KEM phases can be selected. It is
possible to enable or disable the different phases in addition to configuring some
variables such as frequency and power factor.
ETS PARAMETERISATION
The
“Configuration” tab parameters are shown below:
Figure 5. Electricity - Configuration
Power Factor [
0…
100 ] [%]: parameter that set the power factor value.
Frequency [ 50 / 60 ] [ Hz ]: sets the current grid operating line frequency.
Phase x [ enabled / disabled ]: if any of the phases is enabled, a new tab
appears on the left menu. For more information see section 2.2.2.
If at least one of the phases is enabled, the following parameters are also available:
Number of Partial Registers [ 0 / 1 / 2 ]: sets the number of partial registers for
each phase. For more than zero, the following communication objects appear:
➢ “Reset Partial Registers n”:
when receives a
‘1’ all the objects of the
partial register n are reset (set to 0).
➢ “Starting Date Partial Registers n”:
reset date of partial register n.