KEM
Technical Support:
18
Channel Description
: text box without functionality, simply allows adding a
description.
Current Transform Relation
[
3000
]: informative parameter indicating the
transformer ratio (loops number) that the current transformer must have.
Power Supply Voltage (AC)
[
0…
230
…255
][
x1 V
]: sets the voltage of the
phase. T
he object “
[Elec][Phx] Voltage
” will be also available to set this value
(in
mV
).
Power Units
[
W
/ kW
]: sets the measurement units of the phase power objects.
Energy Units
[
Wh
/ kWh
]: sets the measurement units of the phase energy
objects.
Sending Mode for Power
[
Disabled
/ Periodic / With Value Change / Periodic
and with Value Change
]: analogous to the same parameter of the
“Configuration” tab (see section 2.2.1) applied to the phase being configured.
Listed below are the objects that appear when each phase is enabled:
“[Elec][Phx] Voltage”
.
“[Elec][Phx] Disable”
: 1-bit object to enable/disable measurements and
sendings on each phase.
“[Elec][Phx] Active Power”
: provides the value of the power of the phase.
“[Elec][Phx] Current”
: this object gives the current of the phase.
“[Elec][Phx][TR] Consumed Active Energy”
. See section 2.2.2.1.
2.2.2.1
TOTAL REGISTER
The total registers of magnitudes per phase store the accumulated values of energy
consumption of one phase since the start-up of the device.
ETS PARAMETERISATION
The parameters to configure total registers are: