P A G E 7
3275-A
1. Remote Control Window — Receives the infrared signal
sent by the remote.
Note:
Another remote control signal receiving window is
located on the front of the PRO895X.
2. Up/Down/Left/Right arrows — Select and adjust on-
screen menu options.
3. ENTER — Use when an enter function is required.
4. MENU — Accesses on-screen menus.
5. POWER — Turns PRO895X On and Off.
6. Power On Indicator — Lights when power is On.
7. R,G,B, H/V SYNC, V SYNC — Connect a video source that
provides video signals in the form of Red, Green, Blue,
Horizontal, Vertical Sync Outputs, to these input jacks.
8. Video In Jack — Connects a video source with a
composite video output to this jack.
9. Loop Out Jack — Provides the same VIDEO IN signal to
another component.
Note:
Set Loop Out/In switch to “Out” if you connect a
video source to the Loop Out jack.
10.Loop Out/In Switch — Should be in the “In” position
unless a video source is connected to the Loop Out jack.
Note:
Failure to set switch to proper position could
result in a video overload or a washed out video.
11. S-Video — Connect a video source with an S-Video jack
(Y- C Connector) to this input jack.
12. COMM — Connect a computer or serial device to this
jack.
STANDARD CONNECTIONS
CONNECTIONS CENTER
You have a choice of these video source connections: Video
In; S-Video In; and RGB with H/V Sync and V Sync. Use the
COMM jack to connect a computer serial port.
CONNECTIONS OPTIONS
You can connect equipment such as a: laser disc player,
VCR, computer, satellite receiver, or camcorder, (most
equipment that provides a video output)
.
CONNECTIONS CENTER INPUT AND CONTROLS DESCRIPTION/FUNCTION