Zenith DVB312 - Progressive-Scan Slim Design DVD Player, Инструкция по установке и эксплуатации

Страница: 11 / 32

Installation and Setup
11
Audio Connections to Optional
External Equipment
Connect the DVD player to your optional
equipment for audio output.
Amplifier equipped with 2-channel analog
stereo or Dolby Pro Logic ll / Pro Logic
:
Connect the left and right AUDIO OUT jacks
from the DVD player to the audio left and right
IN jacks on your amplifier, receiver, or stereo
system, using the audio cables (A).
Amplifier equipped with 2-channel digital
stereo (PCM) or audio / video receiver
equipped with a multi-channel decoder
(Dolby Digital™, MPEG 2, or DTS)
: Connect
one of the DVD Player’s DIGITAL AUDIO OUT
jacks (COAXIAL X) to the corresponding in jack
on your amplifier. Use an optional digital (coaxial
X) audio cable.
Digital Multi-channel sound
A digital multi-channel connection provides the
best sound quality. For this you need a multi-
channel audio / video receiver that supports one
or more of the audio formats supported by your
DVD player such as MPEG 2, Dolby Digital and
DTS. Check the receiver manual and the logos
on the front of the receiver.
Notes
• If the audio format of the digital
output does not match the
capabilities of your receiver, the
receiver produces a strong, distorted
sound or no sound at all.
• Six Channel Digital Surround Sound
via a digital connection can only be
obtained if your receiver is equipped
with a Digital Multi-channel decoder.
• To see the audio format of the
current DVD in the on-screen display,
press AUDIO.
Amplifier (Receiver)
DVD Connections Panel
A X
R
L
AUDIO INPUT DIGITAL INPUT
COAXIAL