41
41
4.1.1.1 GPS position quality indicator
This area is a status indicator, and also acts as a button that opens the Quick menu.
GPS reception quality shows the current accuracy of the position information.
Icon
Description
ZENEC Navigation Software has no connection to the GPS receiver:
GPS navigation is not possible.
Devices with a built-in GPS receiver are permanently connected. On such
devices, the icon does not appear in normal circumstances.
ZENEC Navigation Software is connected to the GPS receiver, but the
signal is too weak and the receiver cannot determine the GPS position.
GPS navigation is not possible.
Only a few satellites are received. Position information is available, but
elevation (altitude) cannot be calculated.
GPS navigation is possible, but the position error may be significant.
Altitude information is available, the position is a 3D position.
GPS navigation is possible.
4.1.1.2 Status indicator strip
This is a multiple status indicator. It indicates the following status information on a single strip:
Icon
Description
The sound output of ZENEC Navigation Software is muted.
The sound output of ZENEC Navigation Software is enabled.
No TMC receiver is connected or TMC is turned off.
A TMC receiver is connected and a radio station with TMC broadcast is received.
There are new, unread TMC events.
A part of the route is bypassed based on TMC events.
A part of the route is mentioned in TMC events but could not be bypassed (for example,
the destination is on a congested street).
4.1.1.3 Next two route events (Turn Preview fields)
There are two fields reserved on the Map screen to display the next two manoeuvres (route events
that are listed in the Itinerary). Both the type of the event (turn, roundabout, exiting motorway, etc.)
and its distance from the current GPS position is displayed.
Most of these icons are very intuitive and you also know them as road signs. The following table lists
some of the frequently shown route events. The same symbols are used in both fields: