ZENEC ZE-NC510 Скачать руководство пользователя страница 47

Страница: 47 / 68

You have the following data and functions on this screen:

Name

Description

Function

Route line

The upper part of this screen shows your planned

route as a horizontal line. Its leftmost point is the

start of the route, the rightmost one is the final

destination, and you can see your via point flags

along the line, spaced in proportion to their distance.

Tap this field to change the

content of all data fields to via

point information.

Estimated

Arrival

Shows the estimated arrival time at the final

destination of the route based on information

available for the remaining segments of the route.

The calculation cannot take into account traffic jams

and other possible delays.

Tap this field to change the

content of all data fields to via

point information.

Distance Left

Shows the distance you need to travel on the route

before reaching your final destination.

Tap this field to change the

content of all data fields to via

point information.

Time Left

Shows the time needed to reach the final destination

of the route based on information available for the

remaining segments of the route. The calculation

cannot take into account traffic jams and other

possible delays.

Tap this field to change the

content of all data fields to via

point information.

Method

This field shows how the route was calculated. It

displays the Route Calculation Method: Fast, Short,

Easy or Economical.

Tap this field to change the

content of all data fields to via

point information.

Warning icons In these square fields graphical symbols are

displayed in case warnings are attached to the

planned route. These are warnings, so icons always

show information for the whole route, even if the

data fields display values from your current position

to a via point only.

Tap any of the icons for an

explanation.

Opens the Route Planning

options screen from

theSettings menu.

Appears only if at least one via point exists.

Deletes the next via point from

the route.

Appears only if there are no via points in the route. Deletes the active route.

4.1.7 Trip Information screen

The Trip Information screen has both route and travel data you might need during your journey. It can

be opened directly from the Map screen by tapping the Trip Data field (

The fields on this screen are continuously updated while you keep the screen open.

Содержание ZE-NC510





































































Результаты поиска

Содержание ZE-NC510

Отзывы:

Похожие инструкции для ZE-NC510

Бренды по названию

Популярные бренды

ZENEC ZE-NC510, Руководство пользователя программного обеспечения

Результаты поиска

Содержание ZE-NC510

Отзывы:

Похожие инструкции для ZE-NC510

Бренды по названию

Популярные бренды