30
30
x
To enter a new settlement:
1. Tap the button with the name of the settlement, or if you have changed the
country/state, tap
.
2. Start entering the settlement name on the keyboard.
3. Get to the list of search results:
x
After entering a couple of characters, the names that match the string
appear in a list.
x
Tap
to open the list of results before it appears
automatically.
4. Select the settlement from the list.
4. Tap the
button.
5. The map appears with the selected point in the middle. Tap
from the
Cursor menu. The route is then automatically calculated, and you can start navigating.
3.1.2.6 Entering an address with a postal code
All of the above address searching possibilities can be performed with entering the postal code
instead of the settlement name. Find below an example with a full address:
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
,
.
2. By default, ZENEC Navigation Software proposes the country/state and settlement where you
are. If needed, tap the button with the name of the country/state, and select a different one
from the list.
3. Tap the button with the name of the settlement, and enter the postal code:
1. Start entering the postal code on the keyboard.
2. Get to the list of results:
x
After entering a couple of numbers, matching results appear in a list.
x
Tap
to open the list of results before it appears automatically.
3. Pick the settlement from the list.
4. Enter the street name:
1. Tap
.
2. Start entering the street name on the keyboard.
3. Get to the list of results:
x
After entering a couple of characters, the names that match the string appear in a
list.
