ZENEC ZE-NA2000 - Скачать руководство пользователя

Страница: 61 / 68

Button

Description

Background

You can choose the image to be used as the menu background

image.

4.5.6 TMC settings

You can set up the connection to the TMC receiver. If the TMC receiver is working, you can select the

radio station to be received. Tap the following buttons:

If there is no TMC receiver connected to ZENEC Navigation Software, you have the following options:

Button

Description

No TMC Hardware Found!

The first line of the screen informs you about the connection status of

the GPS receiver.
Connecting the TMC receiver is automatic in ZENEC Navigation

Software, so normally you will not need this screen of settings at all.

Protocol

The communication protocol used between the TMC receiver and the

application.

Port

The communication port used between the TMC receiver and the

application.

Baud Rate

The communication speed used between the TMC receiver and the

application.

Autodetect

Tap this button and let ZENEC Navigation Software find and connect

to the TMC receiver.

With a TMC receiver already connected, the content of the screen is different:

Button

Description

Use Auto-tuner

If Auto-tuner is enabled, the tuner of ZENEC Navigation Software

sweeps through the FM CCIR radio band searching for a TMC signal.

The first station with TMC data will be used automatically. When no

TMC signal is available, the tuner keeps on searching. Turn off Auto-

tuner to select a radio station manually.

When Auto-tuner is turned off, search for the desired radio station

manually with these buttons.

Exclude This Station

Push this button to put the currently received FM radio station on an

exception list, and make ZENEC Navigation Software search for

another station instead.

Show Excluded Stations

This button opens the list of radio stations previously excluded. You

can re-enable any or all of the excluded stations.

Содержание ZE-NA2000 -





































































Результаты поиска

Содержание ZE-NA2000 -

Отзывы:

Похожие инструкции для ZE-NA2000 -

Бренды по названию

Популярные бренды

ZENEC ZE-NA2000 -, Руководство пользователя программного обеспечения

Результаты поиска

Содержание ZE-NA2000 -

Отзывы:

Похожие инструкции для ZE-NA2000 -

Бренды по названию

Популярные бренды