ZENEC ZE-NA2000 - Скачать руководство пользователя

Страница: 59 / 68

Road Types Used for Route Planning:

Type

Description

Motorways You might need to avoid motorways when you are driving a slow car or you are towing

another vehicle.

Unpaved

roads

ZENEC Navigation Software excludes unpaved roads by default: unpaved roads can be

in a bad condition and usually you cannot reach the speed limit on them.

Toll roads By default ZENEC Navigation Software includes toll roads (pay roads where there is a

per-use charge) in the routes. If you disable toll roads, ZENEC Navigation Software

plans the best toll-free route.

Charge

roads

Charge roads are pay roads where you can purchase a pass or vignette to use the road

for a longer period of time. They can be enabled or disabled separately from toll roads.

Permit

needed

You might need a permit or permission from the owners to use certain roads or to enter

certain areas. ZENEC Navigation Software excludes these roads from the route

calculation by default.

Ferries

ZENEC Navigation Software includes ferries in a planned route by default. However, a

map does not necessarily contain information about the accessibility of temporary ferries.

You might also need to pay a fare on ferries.

Cross-

border

planning

In some cases the route calculated according to your other navigation and route

preferences would lead through another country. If you wish to always stay within the

same country, turn this option off.

Route Calculation Method types:

Option

Description

Fast

Gives the quickest possible route if you can travel at or near the speed limit

on all roads. Usually the best selection for fast and normal cars.

Short

Gives a route that has the smallest total distance of all possible routes

between the route points. Usually practical for slow vehicles.

Economical

Combines the benefits of Fast and Short: ZENEC Navigation Software

calculates as if it were calculating the Fast route, but it takes other roads as

well to save fuel.

Easy

Results in a route with fewer turns. With this option, you can make ZENEC

Navigation Software to take, for example, the motorway instead of series of

smaller roads or streets.

4.5.4 Regional settings

These settings allow you to customise the application for your local language, measurement units,

time and date settings and formats, as well as to choose the voice guidance profile you prefer. Tap

the following buttons:

Содержание ZE-NA2000 -





































































Результаты поиска

Содержание ZE-NA2000 -

Отзывы:

Похожие инструкции для ZE-NA2000 -

Бренды по названию

Популярные бренды

ZENEC ZE-NA2000 -, Руководство пользователя программного обеспечения

Результаты поиска

Содержание ZE-NA2000 -

Отзывы:

Похожие инструкции для ZE-NA2000 -

Бренды по названию

Популярные бренды