Zena 150 series, Руководство оператора

Страница: 17 / 38

ZENA mobile welding system -- Operators Manual -- Series 150 & 200 Welders
11 11
3/32 inch 1/8 inch 5/32 inch
As soon as you start welding, the Power Control Dial setting should be adjusted to yield
the desired arc and proper weld penetration for the type of welding rod which is being
used, the environmental conditions, and the type of material being welded. Remember,
you can
adjust the power at any time while you are welding .
4) Depress the Power Button, strike an arc, and begin welding. Remember, if you are
having trouble striking an arc, for any reason, you can simultaneously depress the
Power Button and the Boost Button to produce an extra strong arc. Then, as soon as an
acceptable arc is established, release the Boost Button by sliding your finger off the
Boost Button and moving it fully onto the Power Button to return to the welding power
determined by the Power Control Dial’s setting. Remember, you can adjust the power
while you are welding, and you can also use the Boost Button at any time while welding
in situations where extra power for a short time is desired.