Chapter 2
:
Treatment
COOLTONE User Manual
-C
24
Treatment
Device Description
The CoolTone consists of a control unit and 2 applicators.
The CoolTone control unit monitors the temperature of the applicator. In addition, the device will check
with regular intervals the connection between applicator and control unit. Please refer to Chapter 3 in
case any error message should pop-up.
The rated power for this equipment is 220-240 V max. 3kVA.
Repair, expansion, and installation of equipment shall not be performed by
anyone other than the specialized personnel authorized by the manufacturer.
Arbitrary disassembling/assembling of equipment by the user is absolutely
prohibited.
As a strong magnetic field is generated around the magnetic field generating
section, equipment operation technicians, assistants, and patients must not wear
or hold any items which can be affected by the magnetic field.
Use of this device in the presence of strong electromagnetic fields (e.g.,
tomographs, X-ray or diathermia devices) may impair the operation of the device.
Note
When CoolTone is operated, do not use any items such as wristwatches, mobile
phones, radio sets, transmitters or wireless toys as they may be damaged by
magnetic fields. So please be careful and keep them separate at a minimum
distance of 30 cm (approx. 1 foot).
Note
To avoid electromagnetic disturbance during use, the CoolTone shall be installed at
a minimum distance of 30 cm (approx. 1 foot) from any generator, X-ray equipment,
broadcasting device, mobile electric wire, and other electromagnetic radiation
emitting devices.
Note
During the operation of the CoolTone, the patient shall not consume drinks, water,
etc. which can influence the equipment.
