COOLTONE User Manual
Chapter 1: System Overview
-C
15
The device may only be connected to earthed sockets.
Be aware that connecting the power cable with the power switch turned on may cause
malfunction.
2.
Switching the device on
Switch on the device with the power switch (9, Figure 2).
If the applicator is used while in a tilted position, the cooling oil will not reach all sections of the
applicator and will damage the applicator due to overheating. For this reason, it is
recommended to place the applicator in a horizontal position as much as possible.
3.
Switching the device off
Do not switch off system when it is cooling down post treatment. When cooling down completes, the
device is switched off using the power switch (9, Figure 2).
In order to completely disconnect the device (all-phase) from the mains, remove the mains cable.
