56
VC3050-001_v02
2
Remove the foam filter
(15)
. If the foam filter
(15)
is dirty,
it may be washed with running water. Remember to dry it off
before reinstalling the filter.
The main function of the foam filter
(15)
is protecting the
basic HEPA filter
(14)
from excessive dirt.
Due to safety reasons it is forbidden to install a
wet or damaged foam filter (15).
Clean the pleads of the basic HEPA filter
●
(14)
, if any of
them are damaged, the filter definitely must be replaced.
If the basic HEPA filter
(14)
is dirty, it may be washed with
running water. Remember to dry it off before reinstalling
the filter.
Due to safety reasons it is forbidden to install a
wet or damaged basic HEPA filter (14).
Place the foam filter back into its place.
●
3
Put the new/rinsed HEPA basic filter
(14)
back in its place
– pay attention to put the two protrusions in the bottom part
of the HEPA basic filter
(14)
in the holes of the dust container.
A characteristic click notifies about a proper installation.
4
Place the CYKLON dust container with the installed
basic HEPA filter
(14)
in the chamber of the vacuum cleaner.
A characteristic click notifies about a proper installation.
OUTLET FILTER
1
In order to replace the outlet filter
(12)
pick up the
vacuum cleaner handle, then press the fastenings on the
cover of the outlet filter and slide out the cover out of the
vacuum cleaner.
2
Remove the outlet filter frame out of the vacuum
cleaner.
3
Remove the outlet filter out of the frame fastenings.
If the outlet filter
(12)
is dirty, it may be rinsed with running
water. Remember to dry the filter, before its reinstallation.
Due to safety reasons, it is vital never to install
a damp outlet filter.
4
Carefully put the new/rinsed filter onto all frame
fastenings.
Place the cover in such a way that the two protrusions
●
situated in the bottom part of the cover find their way into
the holes in the body of the vacuum cleaner, and then
press the filter cover to snap the fastenings on the body.
A characteristic click notifies about a proper installation.
Always replace a damaged inlet filter only with
a brand new one.
E
Disassembly/assembly of the “CYKLON”
dust container
The vacuum cleaner is equipped with a removable CYKLON
dust container (a removable segment of the vacuum cleaner)
gathering all pollutants. When the CYKLON dust container is
full, it needs to be emptied.
1
The vacuum cleaner is equipped with a CYKLON dust
container full indicator
(6)
. When the CYKLON dust container
full indicator
(6)
lights during operation (with the nozzle or
the brush lifted above the cleaned surface) it means that
the container is full and needs to be emptied. In addition the
CYKLON dust container full indicator
(6)
may activate if the
suction hose or the elements attached to the suction hose
are clogged.
2
Switch off the vacuum cleaner by pressing the “on/off”
button
(7)
.
3
Unplug the appliance.
4
Press the side button on the end of the hose, and then
remove the end of the hose from the inlet hole of the vacuum
cleaner.
5
Press the fastening of the CYKLON dust container
(8)
and remove the CYKLON dust container
(16)
from the
vacuum cleaner.
6
Place the CYKLON dust container over a waste bin.
Press the button on the CYKLON dust container and its
contents will fall out into the bin.
7
After emptying the container, snap its bottom shut.
The container must be tightly closed.
Otherwise the dust might enter the vacuum
cleaner chamber and the suction power will be
reduced.
8
Place the emptied CYKLON dust container into the
vacuum cleaner. A characteristic click notifies about a proper
installation.
Emptying the CYKLON dust container is necessary, when:
a) the CYKLON dust container full indicator light is on,
b) the vacuum cleaner operates poorly,
c) the CYKLON dust container is full.
Special accessories
The following special accessories may be purchased in retail
outlets:
Parquet brush “BNB” (22)
Is used to clean and polish hard, scratch sensitive surfaces
such as wooden floors, floor panels, parquet, marble, tiles,
etc.
Delicate and soft natural bristles ensure maximum vacuum
effectiveness and protects against scratching the cleaned
surface.
F
Содержание Pluser VC3050.0SK
