Zelmer Pluser VC3050.0SK, Руководство пользователя

Страница: 49 / 54

55
VC3050-001_v02
Appliance elements
A
1 Outlet filter cover
2 Combination brush fastening
3 Plug and cord
4 Cord rewind button
5 Suction power regulation control
6 CYKLON dust container full indicator
7 ON/OFF button
8 CYKLON dust container fastening
9 Handle
10 Suction hose
11 Telescopic suction tube with a fastening hook
12 Outlet filter (installed in the vacuum cleaner)
13 Outlet filter frame (installed in the vacuum cleaner)
14 Basic HEPA filter (installed in the vacuum cleaner)
15 Foam filter (installed in the vacuum cleaner)
16 “CYKLON” dust container (part of the removable segment
of the vacuum cleaner)
17 Inlet filter cone (installed in the vacuum cleaner)
18 Switchable combination brush
19 Crevice nozzle
20 Small brush
21 Small nozzle
22 Parquet brush “BNB” (additional equipment – may be
bought in retail centers)
Preparing the vacuum cleaner
for operation
1 Press the side button on the end of the suction hose.
2
Place the end of the suction hose in the vacuum cleaner.
You should hear a distinctive click, if you do it right.
3 Attach the other end of the hose (the handle) to the
suction tube.
4 Adjust the length of the telescopic suction tube by sliding
the slider according to the arrow and pull out/ pull the tube
together.
5 Assemble the proper nozzle or brush to the other end of
the suction tube.
6 To clean hard surfaces – wooden floors, plastic floors,
ceramic tiles etc. pull out the brush by pressing the switch on
the combination brush according to the figure .
7 Pull the plug and cord (3) out of the vacuum cleaner.
While pulling out the cord, pay attention to the
yellow stripe which signals the end of the cord.
Further attempts (pulling on cord) may result in
damaging the cord.
8 Plug in the appliance.
B
Before turning the vacuum cleaner on, check whether the
CYKLON dust container is installed in the chamber of the
vacuum cleaner, and whether the inlet and outlet filters are
installed in the vacuum cleaner.
9 Switch on the vacuum cleaner by pressing the “on/off”
button (7) .
10 The vacuum cleaner is equipped with a suction power
regulation control. The power is controlled by means of
a knob.
11 Turning the knob according to the label increases or
respectively decreases the suction power.
Filter disassembly
Before changing the filters make sure that the vacuum cleaner
is switched off and unplugged from the mains supply.
INLET FILTER CONE
It is necessary to clean the inlet filter cone from time to time.
1 Remove the CYKLON dust container and empty it
according to paragraph (F) .
2 Release the fastening of the HEPA basic filter (14) and
remove it from the CYKLON dust container.
3
Press the button situated on the CYKLON dust container
and open the bottom of the container.
4 Turn the inlet filter cone (17) clockwise.
5
Remove the inlet filter cone from the CYKLON dust
container.
6 If the inlet filter cone (17) is dirty, it may be rinsed
with running water. Remember to dry the cone before its
reinstallation.
Pay attention to the gasket placed on the
bottom of the cone collar. Do not lose it.
7
Place a new/rinsed inlet filter cone into the socket in
such a way that the two protrusions placed on the collar are
situated under the fastening in the body of the container.
8 The cone should be pressed tightly and turned to the
limit counterclockwise. A characteristic click notifies about a
proper installation.
9 Snap the bottom of the CYKLON dust container.
10 Place the HEPA basic filter (14) . Pay attention so that the
two protrusions on the bottom part of the HEPA basic filter
(14) find their way into the holes of the dust container.
11
Place the CYKLON dust container in the chamber of the
vacuum cleaner. A characteristic click notifies about a proper
installation.
BASIC HEPA FILTER & FOAM FILTER
It is necessary to clean the basic HEPA filter from time to
time, as it is contaminated with dust.
Uninstall the CYKLON dust container and empty it according
to paragraph (F) .
1
Release the fastening of the HEPA basic filter (14) and
remove it from the CYKLON dust container.
C
D