Zelmer CK1004, Руководство пользователя

Страница: 31 / 32

35
The appliance is compliant with the requirements of the
following directives:
–
Electrical equipment designed for use within specific
voltage limits (LVD) – 2006/95/EC.
–
Electromagnetic Compatibility (EMC) – 2004/108/EC.
The product is affixed with a CE Mark on the data plate.
For CE marking declaration of conformity please visit the
manufacturer’s website at www.zelmer.com.
Structure of the kettle
1 Lid
2 Spout
3 Water level indicator
4 Handle
5 Lid opening button
6 Power base
7 ON/OFF button
8 Program selection button
9 +/– temperature adjustment buttons
10
Display
11 Storage space for the connecting cord
12 Anti­deposit filter
Preparation of the electric kettle for
operation
Before the first use, wash the kettle inside
(for washing instructions see “Cleaning and
maintenance”), fill it with water up to the “max”
level, and let it boil four times (use fresh water
each time) and wash again.
Operating instructions
of the electric kettle
1
Press the lid opening button to open the lid. Place the
filter in the kettle, if it was removed earlier.
2 Remove the kettle from its power base and fill it with
desired amount of water (the water level is shown on the
indicator).
Do not boil the water if it is below the minimum
level or beyond the maximum level on the
indicator (3).
3 After plugging the power base into the mains the display
show the letter “E”, meaning the power base is connected
appropriately, and the kettle is removed from the power base.
4
Close the lid, and put the kettle on the stand. The LCD
shows current water temperature.
5 Press the ON/OFF button without activating any other
functions. The kettle will start boiling water until it reaches
100°C , and then will automatically turn itself off, informing
about it by a sound signal.
A
B
●
Use the kettle for boiling water only.
●
Do not open the lid immediately after water has boiled
– steam might condense and appear on the exterior
of the kettle.
●
Do not place the kettle on or near hot objects.
●
Do not immerse the kettle or the power base in water
when filling or washing the electric kettle.
●
In the event that water gets into the inside electric
elements of the kettle, or onto the power base,
carefully dry these elements before plugging the kettle
into the mains.
●
Do not operate the kettle when empty.
●
Do not use the kettle with the lid open.
●
Do not use any abrasive cleaning agents such as
emulsions, creams, pastes, etc for cleaning the kettle
body. They might remove graphic information symbols
such as: scales, marks, warning signs, etc.
●
The appliance is not intended to be operated by means
of an external timer or separate remote­control system.
SUGGESTION
Information on the product and
suggestions for its use
●
This appliance is intended to be used in household and
similar applications such as:
● staff kitchen areas in shops, offices and other
working environments;
●
farm houses;
●
by clients in hotels, motels and other residential
environments;
● bed and breakfast type environments.
In case it is used for food business purposes, the
warranty conditions shall change.
●
Do not use the kettle without a filter.
●
The kettle type covered by this user’s manual brings
water to boil very quickly and draws up to 10 A of
current from the mains.
●
Check that the mains fuses used can cope with this
level of power consumption. While boiling water,
unplug all other appliances from this circuit.
Technical data
The technical parameters are given on the data plate of the
product.
1.7 liter capacity.
Zelmer electric kettles are built in I class insulation and they
are equipped with supplying cord with grounding wire and
grounding plug.
The ZELMER kettle meets the requirements of the standards
in force.
This device complies with Commission Regulation (EC) no.
1275/2008 on eco­design requirements.
CK1004-001_v04