52
13. After the end of operation unplug and allow the appliance to cool down, remove all parts, wash and dry the appliance, place the
cord in the housing and put away the food steamer.
CAUTION:
1. Pay special attention while removing the drip tray (6) as water in the water container (9) and the liquid on the drip tray
may still be very hot, although other parts of the appliance are already cool.
2. Never use the appliance without the steaming bowl and the lid installed in the proper places.
Setting the timer
1. Plug in the appliance. The appliance will switch to the standby mode and you will hear a beep.
2. Press the MENU
(14)
to set the cooking mode. Press the cooking time adjustment button “+” or “–“ to change the cooking time.
3. Choose the cooking mode by press in the MENU
(14)
button. The appliance is programmed to cook various food products.
Select one of the cooking modes below:
–
Eggs
Fish
Vegeta
-
bles
Meat
Chicken
Rice
Keep
warm
Program 1 Program 2
Recommend
-
ed time [min.]
12
15
20
30
35
40
10
The possibility
to set the cook
-
ing time
The possibility
to set the cook
-
ing time
After pressing the MENU button
–
(14)
you will hear a beep, the icon attributed to the type of the food product and the programmed
time remaining until the end of the cooking time will be shown on the display
(10)
.
Press the start/stop button
–
(13)
, the selected mode will be switched on and the appliance will operate for the set time.
In order to stop the appliance, press the start/stop button
–
(13)
.
NOTE:
1. Press the start/stop button (13) to stop the cooking process.
2. Press the start/stop button (13) to restart the cooking process.
3. Press the cooking time adjustment button “+” or “–“ to change the cooking time setting. The time settings can be
changed even during the automatic cooking mode.
4. In order to change the cooking mode settings during operation press the start/stop (13) button and then change the
cooking mode using the MENU (14) button. After selecting the cooking mode press the start/stop (13) button.
5. The symbol
will flash on the display (10) during the cooking process.
6. In order to switch off the appliance press the start/stop (13) and next press the button.
7. Program 1 and Program 2 have to be individually set and saved. The instruction of setting P1 and P2 is described be
-
low.
Program 1 and Program 2
1. Plug in the food steamer. The appliance will switch to the cooking mode and you will hear a beep.
2. Press and hold the MENU button
(14)
for about 3 seconds. The icon
will begin to flash.
3. To select P2, press the MENU button
(14)
again. The icon
will begin to flash.
4. Set the desired cooking time by pressing the cooking time adjustment button “+” or “–“. You will hear a beep each time you press
the button.
5. Press the start/stop button
(13)
o save the set time. The digits on the display will stop flashing.
NOTE:
You can use P1 and P2 to save the most commonly used cooking times. For example if you cook meat in the food steamer for 55
minutes, set the cooking time for P1 or P2 for 55 minutes.
It is possible to adjust the time while using P1 and P2.
Setting the automatic timer
1. Press the automatic timer button
.
2. Set the time, after which the cooking process is to start by pressing the cooking time adjustment button “+” or “–“.
3. The time setting will increase in the following intervals 0 min, 5 min, 10 min, 15 min, …, …, …, 23.55 min, 0 min (reverse order
after pressing the “–“ button).
4. Press the start/stop button
(13)
. The available cooking modes and the icon will be shown on the display.
5. Choose the cooking mode by pressing the MENU button
(14)
.
6. If you need to set the cooking time, press the cooking time adjustment button “+” or “–“.
7. Press the start/stop button
(13)
.
8. The time after which the cooking process is to start will decrease in one minute intervals and the icon will show on the dis
-
play.
9. The cooking process will start when the timer reaches 0.
10. After the end of the cooking process, you will hear two beeps and the appliance will automati
-
cally switch to the keep warm mode. The icon
will begin to flash.
11. After 20 minutes of keeping the temperature, you will hear two beeps and the appliance will
automatically switch off.
Cooking eggs
1. Prepare the food steamer according to the above instructions.
2. Place the eggs in the steaming bowl with the egg holder.
3. Cover the food steamer with the lid.
4. Set the cooking time (recommended or individually chosen).
Содержание 37Z011
