Zeliox ZEL16-1,2-EU, Руководство пользователя и инструкция по установке

Страница: 16 / 48

16
5.1.5 Operating status “interactive charging via shore power”
In this state, the Zeliox Compact is connected to the mains and the charger
will be active. 230V will be applied to both front (schuko socket) and the
back (fixed connection for users). This output is immediately available, but
can be switched via the 230V-out icon on the touch screen.
• USB 5V/2A is not switchable and always available, unless the Zeliox
Compact is switched off.
• The 12V output is available and can be turned on via the 12V icon on the
touch screen.
• The white LED in the on/off switch will start flashing to indicate that
charging is active.
5.1.6 Operating condition “automatic charging via shore power”
This mode can be used when the Zeliox Compact is connected to a timer.
This also prevents the inverter from being left on unnecessarily when the
voltage drops.
The following voltages appear directly on the respective outputs:
• 230V at the front and rear
• 5V front USB
On the display, the 230V-in icon will light up and the LED in the switch will
flash. The 12V output does not turn on automatically and must be switched
manually via the main menu.
5.1.7 Operating status “Autonomous charging via shore power”
switch on and off (long term storage)
Before the Zeliox Compact can be put away in this mode, it must first be
started. Connect the Zeliox Compact to the shore power, this will now
start to charge. Press the on/off switch, a warning will be shown that the
Zeliox Compact is charging. Press the on/off switch again and the Zeliox
Compact will turn off.
The Zeliox Compact will now turn on when the battery comes into
undervoltage and will charge. After the batteries are fully charged, the
Zeliox Compact will automatically switch off again.